Zero-Leak Gold® Plugs

Provided for reference purposes only. Accepted, published, industry-standard tables take precedence over the data presented here.


METRIC ISO 6149 PORT REFERENCE DIMENSIONS
(11/13/14)

 R 
E
F		 Tube
OD		 B (1)
Thread Size		 C D (2)
Min. Dia.		 J
Full Thread
Depth, Min.		 K O
Min. Dia.		 P (3)
Min.		 S
Max.		 U (5)
Dia.		 Y (3) Z
Angle
Min Max MM MM +.12
-.0		 MM MM MM +.12
-.0		 MM ±1 Deg.
A 4 M8 X 1.0 6.92 7.15 3 10.0 1.6 11 11.5 1.0 9.1 17 12
B 5 M10 X 1.0 8.92 9.15 4 10.0 1.6 13 11.5 1.0 11.1 20 12
C 6 M12 X 1.5 10.38 10.68 6 11.5 2.4 16 14.0 1.5 13.8 22 15
D 8 M14 X 1.5 12.38 12.68 7.5 11.5 2.4 18 14.0 1.5 15.8 25 15
E 10 M16 X 1.5 14.38 14.68 9 13.0 2.4 20 15.5 1.5 17.8 28 15
F 12 M18 X 1.5 16.38 16.68 11 14.5 2.4 22 16.5 2.0 19.8 29 15
G 16 M22 X 1.5 20.38 20.68 14 15.5 2.4 26 18.0 2.0 23.8 34 15
H 20 M27 X 2.0 24.84 25.21 16 19.0 3.1 32 22.0 2.0 29.4 40 15
I 22 M30 X 2.0 27.84 28.21 18 19.0 3.1 35 22.0 2.0 32.4 43 15
J 25 M33 X 2.0 30.84 31.21 22 19.0 3.1 38 22.0 2.5 35.4 49 15
K 32 M42 X 2.0 39.84 40.21 30 19.5 3.1 47 22.5 2.5 44.4 60 15
L 38 M48 X 2.0 45.84 46.21 36 19.5 3.1 53 22.5 2.5 50.4 66 15
  50 M60 X 2.0 57.84 58.21 40 21.5 3.1 65 24.5 2.5 62.4 76 15
FOR CARTRIDGE CAVITY ONLY (SEE ISO 7789)
    M20 X 1.5(5) 18.38 18.68   14.5 2.4 24   2.0 21.8 32 15
  1. Tolerance class 6H.
  2. Recommended minimum connecting hole application may require a different size.
  3. Tap drill depths given require use of a bottoming taps to produce the specified full thread lengths. Where standard taps are used, the tap drill depths must be increased accordingly.
  4. Preferred for diagnostic port applications.
  5. Preferred for cartridge valve applications.

Zero-Leak Gold® Plugs

EPCO Products, Inc. • PO Box 9250 • Fort Wayne, Indiana 46899 • 800-879-3726
www.zeroleak.com • Email: info@zeroleak.com

All contents Copyright 2014 EPCO Products, Inc. All Rights Reserved.